27:04

Yearly chatter 2023 edition

26:10

Shop thoughts and sights!

32:29

Its been long enough!

27:19

How to use a Fanuc 0M -control part 2, coordinate systems, work offsets and tool offsets

11:08

How to use a Fanuc 0M -control part 3, creating, editing, switching and moving programs

08:15

How to use a Fanuc 0M -control part 1, startup and basics

14:19

All is well!

19:39

Trepanning, axial grooving and roughing on the Takisawa lathe

12:36

Shop news and a demo part on the Doosan Puma! Part2

33:10

Shop news and a demo part on the Doosan Puma! Part1

26:48

Back with an update and news!

10:59

Basement update!

14:17

First part on the Puma!

24:04

The Puma is ready! I'm not.

14:40

A big day!

36:33

Shop stuff

35:31

Grinding some parallels and lathe leveling

18:35

Plowing snow with my excavator

09:33

My daily work

25:10

Less nothing and more machine!

25:29

Catching up!

08:37

A blast from the past

02:04

Reinforcements from Latvia!

23:09

Random shop clips

27:13

Catching you up! -First time trepanning!!-

28:24

Turning and milling of steel pins part 2 of 2

19:14

Sailboat tour!

19:47

Turning and milling of steel pins part 1 of 2

11:09

Tool changer repairs

07:21

Say goodbye to Bedford :(

11:02

Fitting a 4-Jaw to the IZH lathe

30:55

Fitting a trepanning tool to the Dainichi lathe. Also running the 1M63 lathe!

30:47

How to set work shift, work offsets and tool offsets on a Fanuc 10T lathe

08:37

Moving the Akira-Seiki vmc and Femco lathe

21:05

Milling steel on the 4th axis!

19:04

Monthly chatter -making chips again!!-

05:01

Vardø, Norway

19:55

Chatter 57 -New VMC and surface grinder!!-

20:44

Chatter 56 -New lathe!!-

15:59

Chatter 55 -Dah Lih mill at work but no new machine news yet-

20:46

Chatter 55 -Alu turning and machine news!-

07:59

Fanuc 0m rigid tapping problems part 2

06:02

Fanuc 0m rigid tapping problem

18:42

Chatter 54 -Turning and milling steel-

16:38

Daily chatter 53 -Christmas update with Dainichi lathe work-

22:59

Daily chatter 52 -Still alive! Shop update!-

14:19

Daily chatter 51 -Fitting a bell housing to an engine block-

11:37

Daily chatter 50 -Chips are flying again!-

13:08

Daily chatter 49 -Stanko 2N135 drill press and shop update-

11:39

Daily chatter 48 -The workshop move-

11:39

Daily chatter 47 -Forklift!!!!!!!-

21:13

Daily chatter 46 -Bedford repairs, constructive phase-

25:08

Daily chatter 45 -Making parts for the Bedford truck part 2-

22:36

Daily chatter 44 -Making parts for the Bedford truck part 1-

35:28

Daily chatter 43 -Bedford repairs, destructive phase + better look at the new shop-

05:03

Daily chatter 42 -Bedford is back!-

22:23

Daily chatter 41 -Turning large thin wall tubing on the Dainichi lathe-

17:10

Daily chatter 40 -Hogging aluminum on the TOS lathe with a following rest-

22:31

Daily chatter 39 -Daily work-

09:52

Daily chatter 38 -More manual work on the TOS lathe-