07:35

Display on SSD1327 grayscale OLED with Arduino Nano RP2040 Connect/CircuitPython

01:20

Fixed: Raspberry Pi OS cannot find 5G Hz WiFi Network

15:05

Install and run 64-bit Ubuntu MATE 22.04 LTS on Raspberry Pi 4

01:41

Enable Boot from USB for Raspberry Pi 4

06:44

ESP32-C3/MicroPython BLE UART Communication

01:40

ESP32-C3/MicroPython multithreading exercise, get user input un-blocked using _thread.

03:06

MicroPython/ESP32-C3 Exercise: send/receive command via BLE UART

03:17

MicroPython/ESP32-C3-DevKitM-1 exercise: onboard BOOT button, and RGB LED (Neopixel).

11:13

MicroPython bluetooth (BLE) exampls, run on ESP32-C3.

02:44

MicroPython/NodeMCU ESP-C3-32S-Kit to control onboard LEDs

05:05

Flash MicroPython v1.19 firmware on ESP32-C3 (ESP32-C3-DevKitM-1/NodeMCU ESP-C3-32S-Kit)

10:51

BLE UART communication between ESP32-S3 (arduino-esp32) and HC-42 BLE Module

06:36

HC-42 BLE 5 Serial Port Communication Module

03:25

arduino-esp32 2.0.3 add support for ESP32-S3, to develope in Arduino IDE.

05:46

CircuitPython display cursor on displayio, work on Raspberry Pi Pico/ST7789 SPI Display.

18:59

OpenEuler 22.03 LTS (UKUI Desktop) run on Raspberry Pi 4

11:02

ESP32-S2 (arduino-esp32) display on ILI9341 SPI TFT with Touch, using TFT_eSPI Library.

01:41

XIAO BLE Sense (Arduino framework) IMU USB Mouse

01:48

Raspberry Pi Pico/CircuitPython IMU USB Mouse, using LSM303.

09:36

Raspberry Pi Pico/CircuitPython read L3GD20(Gyroscope)

11:11

Raspberry Pi Pico/CircuitPython 7+ LSM303 Accelerometer/Magnetometer

10:56

CircuitPython BLE UART between XIAO BLE Sense and ESP32-C3/S3

03:05

How to open dual Thonny instance

07:34

Raspberry Pi Pico/MicroPython generate QR Code and display on SSD1306 I2C OLED

03:31

XIAO BLE Sense (nRF52840)/CircuitPython generate QR Code and display on SSD1306 I2C OLED

07:01

Seeed XIAO BLE Sense (nRF52840)/CircuitPython 7.2.3, display on SSD1306 I2C OLED

04:11

Install MicroPython on Nucleo F401RE (on Linux Mint)

05:43

Arduino Nano RP2040 Connect/CircuitPython + ov7670 cam (incomplete) display on st7789 Display

02:13

Fix "RuntimeError: None data for /?", in CircuitPython on Arduino Nano RP2040 Connect

04:30

BLE between Nano RP2040 Connect and XIAO BLE Sense, using ArduinoBLE in Arduino Framework.

05:37

ArduinoBLE between Nano RP2040 Connect (Peripheral LED) and XIAO BLE Sense (Central LedControl)

05:11

XIAO BLE Sense/Expansion board (Arduino Framework) to control SSD1306 I2C OLED

03:11

Setup Arduino IDE to support Seeed XIAO BLE (Sense), install adafruit-nrfutil

06:36

Install CircuitPython 7.2.0 on ESP32-S3 (ESP32-S3-DevKitC-1), using esptool v3.2 on Linux Mint

02:59

First power-up NodeMCU ESP-C3-32S-Kit (pre-loaded with AT Command firmware)

20:56

ESP32-C3/CircuitPython/ST7735, display bmp in slideshow, and using OnDiskBitmap/adafruit_imageload.

13:01

Install CircuitPython 7.2.0 on ESP32-C3 (ESP32-C3-DevKitM-1)

03:01

ESP32-C3/arduino-esp32 + 0.96" 80x160 IPS, create custom class extends Adafruit ST7735 library.

04:01

BLE between ESP32/ESP32C3 (arduino-esp32), notify DHT11 reading of temperature & humidity.

06:39

ESP32 + DHT11 temperature & humidity sensor with display on ST7789 and BLE function

07:15

Raspberry Pi Pico/MicroPython + ESP-C3-12F (as a WiFi co-processor using AT Command)

03:00

ESP-C3-12F First power-up

04:37

Arduino Nano RP2040 Connect generate QR Code and display on ST7735 TFT

10:09

Arduino Nano RP2040 Connect + ST7735 SPI TFT with SD Card, read and display bitmap.

01:09

ESP32-C3/arduino-esp32 to display on ST7735 and ST7789 SPI LCDs

04:49

MicroPython/PyBoard exercise: + 1.8" 128x160 TFT ST7735 SPI

04:12

arduino-esp32 CameraWebServer example, run on ESP32-S2-Saola-1 with ov2640

06:53

Arduino IDE, open two Serial Monitors

05:31

arduino-esp32, drive SSD1306 I2C OLED with ESP32/S2/C3 using esp8266-oled-ssd1306 library

03:34

arduino-esp32, list the default function pins of ESP32C3/S2 Dev Module, locate pins_arduino.h

05:51

Drive ESP32-C3-DevKitM-1/ESP32-S2-Saola-1 on-board RGB LED (WS2812) in Arduino Framework

03:57

Install arduino-esp32 2.0.0 on Arduino IDE, to program ESP32-S2/C3.

04:45

ESP32-C3/MicroPython + SSD1306 I2C OLED

10:07

Flash MicroPython firmware on ESP32-C3

06:16

STM32F411/CircuitPython 7, read SD Card, load bitmap and display on ST7735 LCD

07:34

STM32F411/CircuitPython 7, with SPI ST7735 LCD

03:21

CircuitPython 7 exercises on STM32F411, with SSD1306 I2C OLED

03:11

nanoESP32-S2 + ov7670 cam module/ST7789 SPI TFT (CircuitPython 7.0.0)

10:56

nanoESP32-S2/CircuitPython 7 + SPI ST7789 LCD

13:16

Download and Install openEuler on Raspberry Pi